Audi A3 8P 2.0 TDI BMN Diesel Front Driveshaft Right O/S 1K0407272NJ

Description

Audi A3 8P 2.0 TDI BMN Diesel Front Driveshaft Right O/S is a component from the Driveshafts group, designed for the front right suspension in Audi vehicles with a diesel engine. This is a used original part that allows for a technically correct repair of the drivetrain without the need to resort to replacements with uncertain parameters. By maintaining factory geometry and operating characteristics, the driveshaft supports stable handling and predictable vehicle behavior.

Specifications and technical data

• SKU: 1K0407272NJ
• Mark: Audi
• Condition: Used
• OEM Part Number: 1K0407272NJ
• Substitutable numbers: 1K0407272NJ, 1K0 407 272 NJ
• Location on the vehicle: Front, Right
• Fuel type: Diesel
• Category: Driveshafts

Purpose and function in the drivetrain

The described front right driveshaft operates in the area connecting the gearbox to the wheel hub, transmitting torque in a diesel-powered vehicle. It is a key element of the drivetrain, responsible for:

• stable power transmission to the front right wheel,
• cooperation with the suspension and steering system under variable loads,
• maintaining proper drive geometry during cornering and suspension travel.

Thanks to its fitment for the specific Audi A3 8P 2.0 TDI BMN configuration, the correct length, joint kinematics, and operating characteristics under loads typical for a diesel unit are maintained.

Compatibility and fitment for Audi

The driveshaft has been designed with Audi vehicles in mind, which translates into factory-standard fitment for mounts, joints, and seals in the front right corner of the vehicle. The correct placement on the vehicle (front, right side) eliminates the need for modifications and allows for installation in accordance with service documentation.

In practice, this means:

• proper fitment with the hub and gearbox,
• correct cooperation with suspension and brake components,
• maintenance of factory clearances and joint operating ranges.

Operating characteristics in a diesel engine

Diesel engines generate high torque at low RPMs, which is why components from the Driveshafts group must be prepared for higher torsional loads. Using this diesel-version driveshaft promotes:

• adequate resistance to material fatigue during long-term operation,
• stable torque transmission without excessive vibrations,
• maintaining drivetrain refinement during dynamic driving.

A well-chosen driveshaft reduces the risk of unwanted vibrations, knocking, or play that may occur when using unsuitable replacements.

Condition, origin, and service application

The item is offered as a used part, which allows for an economical repair while maintaining the manufacturer’s original specifications. This solution is particularly beneficial for vehicles used intensively, where reasonable service costs are important while maintaining correct technical parameters.

The front right driveshaft for the Audi A3 8P 2.0 TDI BMN will work well both for a typical replacement of a worn component and for repairs after a collision in the area of the front right suspension. Choosing an original, used part allows you to maintain the consistency of the drivetrain with other factory components.

Technical support and selection of drive components

When working on the drivetrain, it is worth paying attention to the condition of the clutch, dual-mass flywheel, and other components that work with the driveshafts. Detailed tips on diagnostics and part selection can be found in the article: Clutch and dual-mass flywheel – diagnostics and selection of parts for the drivetrain, which discusses practical examples and typical symptoms of wear.

If you are planning a comprehensive repair or upgrade of the drivetrain area in your Audi and need other elements from the same group, such as other driveshafts, shafts, or joints, check the available parts in the Audi Driveshafts category.