VW Polo 6R 1.2 Suspension Leg Front Left N/S Wheel Carrier Hub Strut Caliper

Description

VW Polo 6R 1.2 Suspension Leg Front Left N/S Wheel Carrier Hub Strut Caliper is a complete, used component from the Suspension replacement kits category, designed for installation on the driver’s side. It contains key components responsible for wheel guidance, load-bearing, and interaction with the braking system, allowing for an efficient and technically correct repair of the front suspension in a Volkswagen Polo 6R.

Specifications and technical data

• SKU: 6R0413031C-2
• Mark: Volkswagen
• Condition: Used
• OEM Part Number: 6R0413031C
• Substitutable numbers: 6R0413031C, 6R0 413 031 C, 6Q0407255AC, 6Q0 407 255 AC, 1K0615123D, 1K0 615 123 D, 6R0615301, 6R0 615 301
• Location on the vehicle: Front, Left
• Category: Suspension Component Replacement Kits

Purpose and vehicle placement

The presented set is designed for installation on the front left side of the vehicle, in the suspension and wheel guidance area. It includes the suspension leg (strut), steering knuckle with hub (wheel carrier / hub), and brake caliper, making it a cohesive assembly of components that work together at a single point on the vehicle body.

This solution is particularly beneficial for post-collision repairs, replacing worn components, or restoring suspension geometry, as it allows for the replacement of the entire assembly in one installation process, without the need to source individual parts from different suppliers.

Set construction and function of individual elements

The set contains the basic components responsible for wheel guidance and interaction with the braking system:

• suspension leg – transfers loads from the body to the wheel and works with the spring and shock absorber,
• steering knuckle with hub – provides mounting for the wheel hub, works with the bearing and steering system components,
• brake caliper – enables the operation of the brake disc and pads, responsible for effective deceleration.

Thanks to this configuration, you receive a technically consistent assembly that facilitates maintaining proper suspension geometry and correct interaction with the braking system on the front left axle side.

Benefits of using an original Volkswagen set

The product comes from the Volkswagen line, which means factory mounting and construction parameters are maintained. Original components ensure:

• precise fit to the steering knuckle, shock absorber mounts, and steering elements,
• proper interaction with the factory braking system,
• preservation of the suspension performance characteristics intended by the manufacturer.

In the case of a used suspension set, it is important that the elements come from the same vehicle, which minimizes the risk of dimensional differences or deviations resulting from combining parts from different sources. This is a practical solution for service repairs, where both technical correctness and reasonable cost are important.

Application in VW Polo 6R 1.2 and installation aspects

VW Polo 6R 1.2 Suspension Leg Front Left N/S Wheel Carrier Hub Strut Caliper has been prepared for direct application in this specific model. Thanks to the preservation of factory mounting points, it is possible to:

• restore the original front axle geometry after mechanical damage,
• reduce installation time by replacing the complete assembly,
• maintain compatibility with standard steering and braking system elements.

During installation, it is recommended to perform a suspension geometry check and verify the condition of cooperating elements, such as tie rod ends or stabilizer links, to fully utilize the potential of the newly installed assembly.

Why choose a complete suspension replacement kit

Choosing a complete set from the Suspension replacement kits category allows you to reduce the risk of mismatching individual elements and speeds up the service process. Instead of searching for the steering knuckle, hub, strut, and caliper separately, you receive a ready-to-install assembly that:

• simplifies diagnostics – you replace the entire area of potential play and deformation,
• reduces the number of points where an installation error might occur,
• facilitates maintaining technical consistency on the front left axle side.

This solution is particularly beneficial for workshops and users who want to restore the proper operation of the suspension and braking system in their Volkswagen Polo 6R in one step.

If you are planning a comprehensive repair or upgrade of the front axle suspension zone in your Volkswagen and need other elements from the same group, such as struts, steering knuckles, or complete assemblies with hubs, check the available parts in the Volkswagen suspension replacement kits category.

For drivers considering the installation of used suspension components and comparing standard solutions with more dynamic configurations, the following article discussing construction differences and the selection of such sub-assemblies may be helpful: Standard vs. sports suspension – construction differences and is it worth buying used suspension parts?.

If you are interested in the broader context of using used, original components in premium class cars and want to better understand the advantages of dismantled parts compared to replacements, check out our blog post: Used parts for Mercedes – original parts from dismantling.